This reed switch based unit is non-blocking, meaning that any or all outputs may be connected to a single input without loading or level shifting.  A "RECall" command loads a previously stored switch configuration and a "DUMPAll" command reads back all currently closed switchpoint addresses. The unit also feature's a front panel lockout to prevent unauthorized control and a fiber optic rear panel link to control slave switching systems (expandable).

Options: (contact factory)

• Special front panel colors
• Other configurations

12055 Front View

- Matrix size - Triple 8 Inputs x 8 Outputs
- Matrix type - Non-Blocking, full fanout
- Frequency range - .DC to 90MHz (-1dB)
DC to 120MHz (-3dB)
- Gain - Unity
- Impedance - 75 Ohms (nominal)
- Open circuit isolation - >90dB @120MHz
- Crosstalk isolation - >70dB @ 120MHz
- Input VSWR - >20dB @ 120MHz
- Output voltage - 6Vp-p loaded into 75 Ohm
- Contact type - Dry reed switch
- Signal connectors - BNC female
- Remote control - RS-232C or IEEE-488
   (GPIB)
- Local control - Keypad/LCD display
- Control connector - DB-25P
- Mating connector - DB-25S (supplied)
- Over current protection - Magnetic circuit breaker
- Cooling - Convection (fan assisted)
- AC power - 85-265VAC, 47-63Hz, 170W
- Operating temp - 0°C to 70°C
- Storage temp - -20°C to +75°C
- Humidity - 90% max (non-condensing)
- Front panel color - Fed Std 595B-26440
  semi-gloss gray
- Weight - 70 lbs.
- Size - 5.25"H x 19.00"W x 25.00"D
- Mounting - Chassis-Trak® CT-S-1-24