Features:
DC to 120 MHz
Non-blocking, full fanout
Unity gain
RS-232C and IEEE-488 interfaces
Crosspoint verification
Front panel keypad control & LCD display
Recalls 40 configurations
System Description:
This reed switch based unit is non-blocking, meaning that any or all outputs
may be connected to a single input without loading or level shifting.
A “RECall” command loads a previously stored switch configuration and
a “DUMPAll command reads back all currently closed switchpoint addresses.
The unit also feature's a front panel lockout to prevent unauthorized control
and a fiber optic rear panel link to control slave switching systems.
Options:
Special front panel colors
Other configurations
|
-
Matrix size 16 Inputs x 16 Outputs
-
Matrix type Non-blocking, full fanout
-
Frequency range ±2dB @ DC to 120MHz
±0.5dB (any 50MHz segment
with 1 to 1 connection)
-
Gain Unity
-
Impedance 75 Ohms (nominal)
-
Input return loss >17dB @ 120MHz
-
Open circuit isolation >80dB @ 120MHz
-
Crosstalk isolation >65dB @ 120MHz
-
Output voltage 5Vp-p @ 120MHz
-
Contact type Dry reed switch
-
Signal connectors BNC female
-
Remote control RS-232C or IEEE-488 (GPIB)
-
Local control Keypad/LCD display
-
Control connector DB-25P
-
Mating connector DB-25S (supplied)
-
Interface type DTE configured
-
Over current protection Magnetic circuit breaker
-
Cooling Convection (fan assisted)
-
AC power (115V) 85-120VAC, 47-440Hz, 140W (or DC)
-
AC power (220V) 200-265VAC, 47-440Hz, 140W (or DC)
-
Operating temp 0°C to +50°C
-
Storage temp -20°C to +75°C
-
Humidity 90% max (non-condensing)
-
Front panel color Fed Std 595B-26440 semi-gloss gray
-
Weight 75 lbs.
-
Size 6.97"H x 19.00"W x 21.00"D
-
Mounting Chassis-Trak® CT-S-1-24
|
