Features:
Independent R.F. or Video Matrices
Non-blocking, full fanout
Unity gain
RS-232C and IEEE-488 interfaces
Crosspoint verification
Front panel keypad control & LCD display
Recalls 40 configurations
System Description:
The MSC 11826 is a dual 16 input by 16 output wideband coaxial non-blocking
matrix that is capable switching 75 ohm video and 50 ohm RF signals and
is fully programmable. The Model 11826 is an excellent general purpose
matrix. Both the Video and R.F. sections are controlled from a single control
bus, RS-232 or IEEE-488 plus the front panel keypad. The plug-in matrices
are interchangeable. The unit will accept two of the same type if required.
Options: (contact factory)
Special front panel colors
Other configurations
-
Common Spec's:
-
Humidity 90% max (non-condensing)
-
Front panel color Fed Std 595B-26440
semi-gloss gray
-
Weight 74 lbs.
-
Size 6.97"H x 19.00"W x 21.00"D
-
Mounting Chassis Trak® CT-S-1-24
|
-
Video section 16 Inputs x 16 Outputs
-
Frequency range <-1dB @ DC-80MHz
<-3dB @ DC-110MHz
-
Impedance 75 ohms (nominal)
-
Input return loss >30dB @ DC to 110MHz
-
Open circuit isolation >90dB @ DC-110MHz
-
Crosstalk isolation >65dB @ DC-110MHz
-
Maximum output voltage ±5 V into 75 ohms
-
R.F. section 16 Inputs x 16 Outputs
-
Frequency range <-1dB @ 5 to 210MHz
<-3dB @ 3 to 250MHz
-
Impedance 50 ohms (nominal)
-
Input return loss >15dB @ 3 to 100MHz
>10dB @ 3 to 250MHz
-
Open circuit isolation >65dB @ 3 to 250MHz
-
Crosstalk isolation >65dB @ 3 to 250MHz
-
Maximum output voltage +20dBm into 50 ohms
-
Common Spec's:
-
Matrix type Non-blocking, full fan-out
-
Gain 0dB (nominal)
-
Contact type Dry reed switch
-
Signal connectors BNC female
-
Remote control RS-232C or IEEE-488 (GPIB)
-
Local control Keypad/LCD display
-
Control connector DB-25P
-
Mating connector DB-25S (supplied)
-
Interface type DTE configured
-
Over current protection Magnetic circuit breaker
-
Cooling Convection (fan assisted)
-
AC power 85-130VAC, 47-63Hz, 160W
-
Operating temp 0°C to +50°C
|
