Features:
200-400MHz frequency band pass
Solid state pin diode switch elements
Non-blocking, full fanout
Unity gain
RS-232C and IEEE-488 interfaces
Crosspoint verification
Front panel keypad control & LCD display
Recalls 40 configurations
Rugged modular construction
Design Condiserations:
-
This unit was designed to provide extremely high open circuit isolation
and low interchannel crosstalk. This was accomplished by careful selection
of the pin diodes used, by separating the subsections into shielded cavities,
using switched grounding techniques and solid overall shielding and high
conductive grounding.
Options: (contact factory)
Special front panel colors
Other configurations
|
-
Matrix size 12 Inputs x 6 Outputs
-
Matrix type Non-blocking, full fanout
-
Frequency range 200MHz to 400MHz ±5dB
-
Gain 0 to+11dB (nominal)
-
Impedance 50 Ohms (nominal)
-
Open circuit isolation >90dB @ 400MHz (typical)
-
Crosstalk isolation >90dB @ 400MHz (typical)
-
Input VSWR <1.5:1 (typical)
-
Contact type Pin diode self terminating
-
Signal connectors BNC female
-
Remote control RS-232C or IEEE-488 (GPIB)
-
Local control Keypad/LCD display
-
Control connector DB-25P
-
Mating connector DB-25S (supplied)
-
Interface type DTE configured
-
AC power (115V) 85-120VAC, 47-440Hz, 140W
-
AC power (220V) 200-265VAC, 47-400Hz, 140W
-
Operating temp 0°C to +50°C
-
Storage temp -20°C to +75°C
-
Humidity 90% max (non-condensing)
-
Front panel color Fed Std 595B-26440 semi-gloss gray
-
Weight 36 lbs.
-
Size 6.97"H x 19.00"W x 20.00"D
-
Mounting Chassis Trak® CT-S-1-24
|
