Features:
picoAmp leakage
Dry nitrogen injection
IEEE-488 interface
Crosspoint verification
Rugged modular construction
Quad 6x24 Triaxial Matrix
The Model 10726-L is configured as a quad 6x24 programmable triaxial switching
matrix with low leakage contacts which are controlled by commands from
a remote computer thru the IEEE-488 interface.
The system has been designed for low voltage and very low current measurements;
more specifically, IC wafer probing. The relays typically feature <±4pA
leakage current at ±20VDC into the common port with 1 contact closed. To
ensure complete lack of moisture within the relays, a dry nitrogen gas
fitting has been provided on the rear of the system to purge the moisture.
The Model 10726-L uses low leakage dry contact switching elements.
|
-
Matrix size Quad 6 Inputs x 24 Outputs
-
Matrix type Bi-directional
-
Leakage ±4pA @ ±20VDC
-
Contact rating 100VDC, .25 Amp, 10W
-
Switching speed <1mS
-
Contact type Dry reed switch
-
Signal connectors Triaxial female (BJ77)
-
Remote control IEEE-488 (GPIB)
-
Control connector DB-25P
-
Mating connector DB-25S (supplied)
-
Interface type DTE configured
-
AC power 115VAC, 47-63Hz, 145W
-
Operating temp 0°C to +50°C
-
Storage temp -20°C to +75°C
-
Humidity 90% max (non-condensing)
-
Front panel Fed Std 595B-26440 semi-gloss gray
-
Weight 80 lbs.
-
Size 5.25"H x 19.00"W x 26.00"D
-
Mounting Chassis-Trak® CT-S-1-24
Options: (contact factory)
Special front panel colors
Other configurations
|
