Features:
DC up to 800MHz depending upon the
number of throws
Two to twenty-four throws
Continuous shield continuity
Rugged machined aluminum housing
Switchpoints individually field replaceable
Extremely low EMI
Low VSWR
Signal circuits isolated from control circuitry
Built-in amplifiers available for video and
R.F. applications
Coaxial Relay Module
Matrix 7000 Series are designed to maintain coaxial switching continuity
over a wider range of critical and high environmental applications. The
Relay housings are constructed of precision machined aluminum alloy for
structural integrity and hard anodized for durability. All signal paths
are silver plated and the covers are gasketed for maximum EMI protection.
The basic reed switch elements are hermetetically sealed in nitrogen filled
gas envelopes and employ rhodium plated contacts to insure non-stick operation.
Matrix and hybrid switching systems are easily constructed by using 9000
series push-on cross straps which mate with the BNC female type UG1094/U
connectors on the switch module. For example: Model 9108 has eight inputs
and one output. See 9000 series catalog sheet for more information.
Applications for 7000 Series:
R.F. and I.F. signal switching
Base band video and pulse switching
Application requiring a high degree of shielding integrity and low contact
and induced noise
Switching DS-1, DS-3, T-1, 1553B & ECL signals
Switching balanced audio
LINK TO: MODEL NUMBER ASSIGNEMENT
|
Specifications:
-
Configuration Single or double pole (2 thru 24 throws)
-
Impedance 50 ohms (75 ohms optional)
-Frequency range (-1dB) 1310 ¸ (N - .13) MHz
(-3dB) 1760 ¸ (N + .2) MHz
-
Isolation See graph (see factory for -I or -IS option)
-
Switching speed 1mS dry contact (3mS mercury wetted)
-
Power 28VDC, 30mA
-
Control connector DA-15P, DB-25P, etc. (D-type mate supplied)
-
Signal connectors BNC- standard (optional) Twinax, Triax, TNC, SMA or F-type
-
Operating temp -30°F to +150°F
-
Humidity 0 to 98% R.H.
-
Shock & vibration 50G's -1mS, 2G's p-p 20-2000Hz
-
Size 3.25"H x .625"W x 1.44" + ( .625" x throws) L
-
Mounting Three 6-32 tapped holes in base (or -C)
|
