Go To The First Page
Model 61057
20 Throw 2-Wire Relay Module
Features:

  • Quad 1x5x2-wire Configuration
  • Contains four independent two-pole,
    five-throw relays
  • Dry reed, low thermal dry reed or mercury wetted contacts available
  • Hermetically Sealed Contacts
  • Designed for use in Model 11600 Chassis
  • May be connected in a 1x20x2 Multiplexer or 2x10x2 or 4x5x2  Matrix Configurations

    • Applications:

  • Balanced or single-ended audio signals
  • Transducer stimuli and response signals
  • Four-wire Kelvin measurement systems
  • Twisted pair for cable transmission line measurements
  • DC signals for controlling motors, high power relays and solenoids

    		•

      Specifications:

      Switch format 4 each two-pole, five-throw

      Operation Each two-wire crosspoint (20 total) independently addressable

      Crosstalk isolation Greater than 70dB @ 100KHz with 600 ohm termination

      Contact rating Dry reed, 200VDC, .5 amp, 10W mercury wetted, 500VDC, 2.0 amp, 50W low thermal dry, 200VDC, .5 amp, 10W

      Thermal EMF <5.0uV from -20°C to 70°C

      Switching speed less than 1 millisecond dry, 3 milliseconds mercury wetted

      Control 20-28VDC @ 2000 ohm coil (dry and low thermal), 1450 ohm coil (mercury wetted)

      Control connectors Cinch DB-25P

      Signal connectors Cinch 57 series 50-pin

      Weight 27 ounce

      Size 4.65"H x .625"W x 12"L

      LINK TO: MODEL NUMBER ASSIGNEMENT

    Phone: 818 222-2301 - Fax: 818 222-2304 - E-mail: tech@matrixsystems.com - http://www.matrixsystems.com