Features:
2000 Volt, switched
Quad 1x60 configuration
Dual 1x30 configuration
RS-232C and IEEE-488 interfaces
Crosspoint verification
Front panel keypad control & LCD display
Recalls 40 configurations
R.I.P.:
-
This system was designed for use in the Super Collider, Super Conductor program which unfortunately
was canceled so the only collision it ever experienced was with a budget
cut.
-
It was to used as part of a system to test amplifiers which were to be
located around the 50 mile circumference of the accelerator.
-
The unit has a total of 300 randomly addressable switchpoints which can
be arranged in both scanner or matrix configurations.
|
-
Matrix size Four 1 Input x 60 Outputs Scanners and two 30 SPST switches
-
Contact rating 2000VDC, .5 Amp, 25W
-
Breakdown voltage >3000VDC
-
Contact type Dry reed switch
-
Signal connectors Burndy #G0JF20-30SNE
-
Remote control RS-232C or IEEE-488 (GPIB)
-
Local control Keypad/LCD display
-
Control connector DB-25P (mating DB-25S)
-
Mating connector DB-25S (supplied)
-
Interface type DTE configured
-
AC power (115V) 85-120VAC 47-440Hz, 180W
-
AC power (220V) 200-265VAC 47-440Hz, 180W
-
Operating temp 0°C to +50°C
-
Storage temp -20°C to +75°C
-
Humidity 90% max (non-condensing)
-
Front panel color Fed Std 595B-26440 semi-gloss gray
-
Weight 30lbs.
-
Size 6.97"H x 19.00"W x 21.00"D
-
Mounting Chassis-Trak® CT-S-1-20
Options: (contact factory)
-
Special front panel colors
-
Other configurations
|
