Features:
DC thru Low R.F.
RS-232C and IEEE-488 interfaces
Crosspoint verification
Front panel keypad control & LCD display
BNC I/O Connectors
System Description:
The system is a bi-directional blocking type relay matrix employing CMOS
switching. The system is randomly addressable over the RS-232C or IEEE-488
bus and includes manual keypad local control. Latching allows any of all
of the 8192 switchpoints to be simultaneously connected.
Blocking means that an input will be loaded by the parallel impedance of
the loads connected to it.
Options: (contact factory)
Special front panel colors
Other configurations
|
-
Matrix size 128 Inputs x 64 Outputs
-
Matrix type Solid-state blocking
-
Frequency range -1dB @ DC
to 250KHz -3dB @ DC to 500KHz
-
Impedance 600 Ohms (nominal)
-
Open circuit isolation >45dB @ DC to 250KHz
>30dB @ DC to 500KHz
-
Crosstalk isolation >45dB @ DC to 250KHz
>30dB @ DC to 500KHz
-
Signal voltage ±Vp-p @ 250KHz into 600 ohm
-
Contact type Solid-state CMOS
-
Signal connectors BNC female
-
Remote control RS-232C or IEEE-488 (GPIB)
-
Local control Keypad/LCD display
-
Control connector DB-25P
-
Mating connector DB-25S (supplied)
-
Interface type DTE configured
-
Over current protection Magnetic circuit breaker
-
Cooling Convection (fan assisted)
-
AC power 115VAC, ±10%, 47-63Hz, 40W
-
Operating temp 0°C to +50°C
-
Storage temp -20°C to +75°C
-
Humidity 90% max (non-condensing)
-
Front panel color Fed Std 595B-26440 semi-gloss gray
-
Weight 25 lbs.
-
Size 8.75"H x 19.00"W x 20.00"D
-
Mounting Chassis Trak® C-300S-1-20
|
